Raised Print - Spot UV and Embossed

Rollem machines cut and collate without crushing the raised print

Struggling to finish your raised print including spot uv or embossed print?
Your traditional methods of finishing using a guillotine mean that as the clamp grips the paper or card to be cut, it crushes the raised print.
With a 4 micron coating of UV there can be a difference of 0.5mm over 12 cards so over a stack of 150 sheets to be guillotined that would mean a 6.25mm difference in the height of the stack from one side to the other. This often means the stack can move causing inconsistent placement of the cut and poor cutting as the card frays.

In contrast the Rollem finishing process means that you:

  • retain the raised print (spot UV or embossing) as there is no clamp to crush the raised print area
  • achieve a consistent cut in the right place on the sheet without movement in a stack of printed sheets
  • achieve a high quality cut without fraying as the sheets are cut individually

Try Us

Contact us on +44 (0) 1226 745476 to discuss your print feed requirements.

Get in touch

Email: [email protected]
Phone: +44 (0)1226 745476
3a Wentworth Way,
Barnsley,
S75 3DH,
United Kingdom

Copyright © Rollem
Powered By Spotlight Studios

Rollem Patent Products Ltd
Registered office address: 3a Wentworth Way, Barnsley, South Yorkshire, S75 3DH
Registered in England and Wales
Company no. 00374392

Pin It on Pinterest